NICE Robus600 Sliding Auto Gate Motor Only


Purchase this product and earn 2667 Points

Unit Sold : 26

30 in stock

SKU: RB600A-M Categories: ,


Product Description

NICE Robus600 600KG 24VDC Double Speed Sliding Auto Gate Motor is an incredible auto gate motor with a powerful 24 volt motor for sliding auto gates that weigh up to 600kg. NICE Robus600 600KG 24VDC Double Speed Sliding Auto Gate Motor is intelligent, safe, and easy to set up. Experience auto gates differently with NICE TOO4254, shop all kinds of auto gate systems, auto gate accessories, and auto gate arms on Security System Asia.

Product Highlights

  • Suitable for Sliding Gate Weight up to 600KG
  • User-friendly: the Nice BlueBUS technology, enables to power and control a maximum of seven couples of photocells from the MoonBus series using two wires only.
  • Practical: the control unit and PS124 buffer battery (optional) can be connected by means of a simple connector and can be housed directly inside Robus.
  • Advanced: RB400 is equipped with a temperature sensor: adapt the motor power to the climatic conditions and at the same time thermal cut-out. A master/slave selection automatically synchronizes two motors. This means it is possible to automate 2-leaf sliding gates set opposite each other.
  • Intelligent: thanks to the obstacle detection system and automatic programming of the working times. Self-diagnosis by means of a flashing light. 8 programming levels.
  • Safe: acceleration and deceleration can be adjusted at the beginning and end of each opening and closing maneuver.
  • Sturdy: base and release in pressure die cast aluminum and epoxy paint finish.
  • Very quiet: gear motor on bearings.

Product Catalog

Product Warranty

3 Years

What’s in the Box?

  1. NICE Robus600 Sliding Motor x 1
  2. NICE Built-in RBA3 Electronic Control Panel x 1
  3. Limit Switch Bracket with Screws x 2
  4. Emergency Release Key x 2
  5. Base Plate with Screw x 1

Additional information