Cart is empty 
Description
Product Description
SECOLink RCR monitoring receiver provides a complex and reliable solution to building up a modern monitoring station. The device can receive signals from alarm control panels through the IP network, telephone line, and radio channel. Due to the universal operation, the device can receive all standard (and most of the non-standard) signals from alarm control panels and communicators. With combination of SECOLink AMS PC-based monitoring software, it guarantees not only reliable signal transmission, but also easy to use operator interface.
Product Highlight
- Functional hardware receiver without operating system problems
- (without auto-update, threats, overload, freezing, etc.)
- Massive 19” rack housing
- LCD display with 240×128 pixels
- Power supply (16.5Vac main / 12Vdc battery)
- Built-in IP card in the base configuration
- 2 serial ports / USB connectors for PC connection
- 1 radio card connector with 2 radio channels (optional)
- 8 telephone line card connectors (optional)
- Receiving 4/2, Contact ID and SIA format messages
- IP test code monitoring until 255 client accounts
- Continuous checking of Internet connection
- Client phone number and IP address display
- Remote programming (through IP network)
- Event list monitoring from a web browser
- Encrypted communication (AES-128)
- Two-way radio communication with repeater unit
- Local configuration through the USB connector
- Firmware update function
- CE declaration, ISO 9001:2009 certificate
- Excellent product support, development possibilities
- Made in the EU, proven quality
Product Specification
| Product | SECOLink RCR |
| Power supply | 16.5 Vac @ 30VA (main) / 12Vdc @ 7Ah (battery) |
| Maximum current consumption | about 500 mA (depends on configuration) |
| Event buffer | up to 2000 events |
| Operating temperature | 10 °C / +30 °C 40% relative humidity |
| Sizes (W / L / H) | 485 x 220 x 135 mm |
| Weight | 3000 g |
