Description
Product Highlight
- For PAS808M & PAS832
 - Send Sms up to 5 phone number
 - Alarm / Disarm / Clear alarm by sending Sms
 - It gives options to report to the receiver of CMS
 - Control and monitor the system with the mobile app
 - SECOLINK PRO (set on TCP/IP or SMS communication)
 - With simple SMS messages or with phone call
 
Product Video
Product Specification
| Features | GSV6C | 
| Description | Versatile GSM/GPRS communicator | 
| Product type | Alarm system module | 
| In-built wired zones | Send Sms up to 5 phone number | 
| On-Board (open collector type) PGM | |
| Reporting to CMS format | CID by GPRS | 
| Reporting protocols for CMS | E2 (Enigma), FIBRO (Sur-gard), CSV (Patriot), SIA | 
| Compatibility with control panels via KEYBUS | PC5xx, PC14xx, PC15xx, PC16xx, PC18xx | 
| Compatibility with control panels via SERIAL | SP4xxx, SP6xxx, SP7xxx, EVOxxx | 
| Compatible with SG-SYSTEM II , III IP card | Yes | 
| Alarm message for end user | SECOLINK PRO app, GSM call, SMS | 
| Available language for voice guide | English (available other languages) | 
| Available language for SMS | English (available other languages) | 
| DTMF converting from PSTN to GPRS | Yes (one way) | 
| Available in plastic enclosure | Yes | 
| Maximum current into -PGM1 | -0.05 A | 
| Maximum current into -PGM2 | -0.05 A | 
| Power supply from an independent source of power: | |
| Maximum battery charging current | +0.035 A | 
| Rated voltage of power supply (AC) | ~20 V | 
| Minimum AC voltage | ~16 V | 
| Maximum AC voltage
 (Note: higher than ~22 V voltage can damage control panel)  | 
~22 V | 
| Maximum current of slow blowing fuse used in primary AC | 250 mA | 
| Maximum AC power consumption | 15 mA | 
| Power supply from an Control Panel source of power: | |
| Power supply (DC) | 9 – 14 V | 
| Current consumption | 50 mA | 
| Current consumption with all PGM’s | 260 mA | 
| Overall dimensions W x H in mm | 120 x 64 | 
| Environmental compliance | ROHS | 
| Operating temperature | From -10oC to +50oC | 
| Interface for communicator settings programming | USB | 
| Interface for communicator firmware updating | USB | 
            
                    
                
                





