NICE Robus600 is an auto gate motor set suitable for sliding auto gates weighing up to 600kg. Robus600 is accompanied by an electromechanical auto gate gear motor with Nice BlueBUS Technology. Robus600 auto gate motor is made user-friendly, practical, and intelligent. Experience seamless and safe auto gate operations with Robus 600 that comes with an Obstacle Detection System and Automatic Programming of the working times. Lastly, the Robus600 auto gate motor is equipped with an almost silent auto gate gear motor on bearings.
- Suitable for Sliding Gate Weight up to 600KG
- User-friendly: the Nice BlueBUS technology, enables to power and control a maximum of seven couples of photocells from the MoonBus series using two wires only.
- Practical: the control unit and PS124 buffer battery (optional) can be connected by means of a simple connector and can be housed directly inside Robus.
- Advanced: RB400 is equipped with a temperature sensor: adapt the motor power to the climatic conditions and at the same time thermal cut-out. A master/slave selection automatically synchronizes two motors. This means it is possible to automate 2-leaf sliding gates set opposite each other.
- Intelligent: thanks to the obstacle detection system and automatic programming of the working times. Self-diagnosis by means of a flashing light. 8 programming levels.
- Safe: acceleration and deceleration can be adjusted at the beginning and end of each opening and closing maneuver.
- Sturdy: base and release in pressure die cast aluminum and epoxy paint finish.
- Very quiet: gear motor on bearings.
What’s in the Box?
- NICE Robus600 Sliding Motor x 1
- NICE Built-in RBA3 Electronic Control Panel x 1
- Limit Switch Bracket with Screws x 2
- Release Key x 2
- Base Plate with Screw x 1
- NICE ERA-INTI 2 Channels Remote Control x 3
- NICE OX2 2 Channels Remote Receiver x 1
- Gear Rack (Each 1Meter Length) x 4